Surface of room temperature ionic liquid [bmim][PF6] studied by polarization- and experimental configuration-dependent sum frequency generation vibrational spectroscopy

Understanding and control of the surface properties such as molecular orientations are of great importance in numerous applications of ionic liquids. However, there remain discrepancies among the previous experimental and theoretical studies on the surface orientation and structures of room temperature ionic liquids(RTIL) systems. In this article, the orientation of 1-butyl-3-methylimidazolium([bmin]) cation at the air/liquid interface of a characteristic RTIL, 1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6]), was investigated by the sum frequency generation vibrational spectroscopy(SFG-VS). Detailed polarization and experimental configuration analyses of the SFG-VS spectra showed the possibility of a small spectral splitting in the CH3 symmetric stretching region, which can be further attributed to the probable existence of multiple orientations for the interfacial [bmim] cations. In addition, the(N)–CH3 vibrations were absent, ruling out the prediction by several recent molecular dynamics simulations which state that portions of the [bmim] cations orient with a standing-up(N)–CH3 group at the ionic liquid surface. Hence, new realistic theoretical models have to be developed to reflect the complex nature of the ionic liquid surface.     

Ratiometric mode with dyads: a breakthrough in dynamic trapping and quantification for redox regulation in living cells

Redox-based post-translational modification of protein thiols has become an attractive strategy in cellular homeostasis and cell signaling.Due to the reductive end of the redox buffer network,the vicinal dithiol-containing proteins(VDPs)maintains an appropriate oxidation-reduction state of proteins through the reversible transformation from vicinal dithiols to disulfide,which is responsible for a variety of     

多金属氧酸盐材料在二氧化碳电催化还原领域中的研究进展

随着工业发展和全球人口的持续增长,人类对化石燃料的消耗日益增加,从而导致大气中二氧化碳含量的显著增加以及与之相伴的一系列环境问题.电化学还原二氧化碳制备高附加值的燃料和化学品具有稳定的效率和较高的经济可行性等特点,目前已成为一种有前景的策略来缓解当前全球面临的能源短缺和气候变暖问题.然而,电催化二氧化碳还原过程存在反应能垒高和复杂的多电子/质子耦合过程等不足,因此,合理有效的电催化剂设计成为该领域的关键问题.近年,理解和明确电化学二氧化碳还原反应过程的活性起源、选择性调控机制和催化反应机理已成为高效电催化剂设计过程中的重要指导原则.作为一类独特的纳米尺度的金属氧簇,多金属氧酸盐(多酸)已成为二氧化碳还原领域的热点材料.尤其是,多酸明确的结构、优越的电子/质子存储转移能力和二氧化碳吸附活化能力有助于探究二氧化碳还原反应过程中的活性起源和构效机制.因此,利用多酸阐明电化学二氧化碳还原反应中的这些关键问题对于开发高效、可实用化的电催化剂意义重大.本文综述了近年多酸在电催化二氧化碳还原反应中取得的进展,重点介绍了多酸阴离子均相分子催化剂、多酸基无机-有机杂化材料催化剂、多酸电解质溶液、多酸-纳米复合材料在电催化二氧化碳还原反应中的应用.利用密度泛函理论结合原位实验证据推测了可能的反应机理,探讨了多酸对电催化活性和产物选择性的影响,揭示了电子/质子存储-转移过程和多酸表面修饰工程在电催化二氧化碳还原过程中的重要作用.最后,本文还分析了多酸基材料存在的问题与面临的挑战,并对多酸基材料在二氧化碳还原领域的未来发展进行了展望,这对理解电催化二氧化碳还原反应中的关键步骤和开发新型高效的电催化二氧化碳还原电催化剂具有启发意义.     

各向异性本构关系在板料成形数值模拟中的应用

对几种能表达面内各向异性的屈服准则Hill、Barlat-Lian、Barlat进行了比较。以弹性变形服从各向同性广义虎克定律的情况下，给出了基于张量算法推导的弹塑性本构关系的一般表达式，并由此导出了相应屈服准则的弹塑性本构关系的显式表达。借助ABAQUS软件本构模块用户子程序接口，分别实现了这些屈服准则在ABAQUS的嵌入。以模拟方形盒的拉延过程为例，分析了不同的屈服准则在板料成形过程数值模拟中的应用。模拟结果表明，基于弹塑性本构关系一般表达所列出的相应屈服准则的显式表达式是正确的；在采用壳元来模拟板料成形时，采用Barlat准则的模拟结果和采用Barlat-Lian准则的结果差别不大。     

不同年龄段天然牙的摩擦磨损行为研究

采用往复滑动摩擦磨损试验台考察了不同年龄段的天然牙同钛合金配副时的摩擦学性能.结果表明:天然牙的摩擦磨损行为同年龄密切相关,早期和中期恒牙的摩擦磨损行为相似,磨损表面主要呈现轻微擦伤迹象,中期恒牙的抗磨性能最佳;乳牙及晚期恒牙的摩擦系数变化波动较大,抗磨性能不佳,磨损表面主要呈现严重犁削和剥落特征.     

INFLUENCE OF ASIAN DUSTS ON THE PHYSICOCHEMICAL PROPERTIES OF ATMOSPHERIC AEROSOLS IN TAIWAN DISTRICT USING THE PENGHU ISLANDS AS AN EXAMPLE

1. Introduction In the early months of each year, Asian dusts transport frequently from Northwest China and Mongolia to the Pa-cific-Rim countries (Kagawa et al., 2001; Uno et al., 2002). It causes significant environmental effects such as ambient air quality deterioration, atmospheric visibility impairment, radiation energy reduction, mineral deposition, and acid rain neutralization (Terada et al., 2002; Zhang & An, 1999). During Asian dust periods, significant increases of atmos-pheric …     

跳马项目的三维实时动态测量系统

为跳马项目研究的电测系统中引入数字信号处理的传递函数及频谱分析的方法,采集和处理了因人体冲击三维力对信号的耦合干扰造成的十分复杂的响应信号,具有较高的动态测试精度.可以获得跳马动作的全部运动生物力学参数.现已用于中国国家体操队进行计算机辅助训炼.     

La_2O_3和WSi_2增强MoSi_2基复合材料的摩擦磨损性能研究

选用MRH-5A型环-块摩擦磨损试验机测定了3种载荷和2种转速条件下La2O3和WSi2增强MoSi2基复合材料在滑动干摩擦时的摩擦磨损性能,采用扫描电子显微镜分析了复合材料磨损表面形貌.结果表明:La2O3和WSi2增强MoSi2基复合材料的抗磨性能优于MoSi2及WSi2/MoSi2材料;当载荷与速度乘积(pv)值小于183.04N·m/s时,La2O3和WSi2增强MoSi2基复合材料的磨损质量损失仅为相同条件下MoSi2的1/4～1/6和WSi2/MoSi2的1/2;这是由于La2O3和WSi2复合增强相存在硬化和韧化协同作用所致;随着pv值增加,La2O3和WSi2增强MoSi2基复合材料依次呈现犁削、粘着磨损和疲劳磨损特征.     

EFFECTS OF FINELY DISPERSED METALLIC PALLADIUM ON MICROSTRUCTURE AND PROPERTIES OF NANOCOMPOSITES PRODUCED BY SOL-GEL TECHNIQUE

Nanosized palladium particles were incorporated into mesoporous silica matrix to obtain nanocomposites using the sol-gel technique. Effects of the finely dispersed metallic palladium on the microstructure and properties of the nanocomposites were investigated. By means of X-ray diffraction and optical absorption, it was found that palladium particles were 5-9 nm in diameter and their uniform dispersion in the mesoporous silica depended on both the content of the palladium and the structural features of the silica matrix. The results showed that the mixing method of preparation led to wider size distribution of the nanosized particles as compared to the immersion method, but dispersed degree was reduced. Although the incorporation of nanosized palladium particles could not substantially induce significant structural changes of the matrix, the apparent red-shifted optical absorptions for the nanocomposites were observed as compared to the parent monolithic silica, particularly with increase in palladium loading and calcination temperature.     

非保守圆薄板的轴对称振动和稳定性

建立了受切向均布随从力作用的圆薄板在面内周边可移、不可移两种情况下的轴对称控制方程，用打靶法直接导出求解变系数常微分方程特征值问题数值解的计算式．通过数值计算，给出了周边可移、不可移的简支、固支圆板自振频率和临界载荷的特征曲线以及相应的临界发散载荷，并分析了泊松比对圆板自振频率和临界载荷的影响．